S8 EV plastering machine - Technical data

Compliance with safety regulations

The S8EV is equipped with the most reliable safety devices. During its operation, the opening of the protection grid automatically stops the rotation of mixing blades. Lifting the vibrating screen blocks the rotation of the screw feeder. The electric engines are protected by power over-charges and brown-outs.



Easy to dismount electric box

Should there be any problem with the electricity box, it is simply a matter of removing the plug and the whole box will be quickly replaced.



The vibrator ensures a quick and efficient screening



A powerful compressor for an uniform spraying



Reduced wear and tear, increased benefit

Thanks to components reliability and the pump's low rotation speed, the S8EV performances are definitely top-of-the-range guaranteeing many working hours without any problem.

Wear and tear resistance

Compared with other plastering machines, the pump's rotor turns at a much lower rate increasing remarkably components' life, thus reducing also maintenance costs. Another factor not to be underestimated is the fact that the S8EV is the only pump of its category able to pump materials until a 10 mm grain size.

Maintenance and assistance

Even if we did our best to fill your quality, performance and reliability demands, your S8EV will eventually require a bit of your attention. You'll discover how quick and easy it is to carry out the necessary operations. Bunker, thanks to its technical assistance, will guarantee a service of the highest professionality guaranteeing minimal machine stoppage time.

Technical data

    S8 EVM
single-phase
with mixer
S8 EV
single-phase
S8 EVM
three-phase
with mixer
S8 EV
three-phase

Electric motor          
Type   220V - 50Hz 220V - 50Hz 400V - 50Hz 400V - 50Hz
Power kW 1,8 1,8 4 4
Compressor          
Output l/min. 250 250 340 340
Pressure bar 4 4 4 4
Power kW 1,5 1,5 2,2 2,2
Screw pump          
Theoric pressure l/min. 20 20 30 30
Maximum grain size mm 10 10 10 10
Maximum theoric pressure bar 15 15 25 25
Conveying distance          
Horizontal* m 40 40 60 60
Vertical* m 15 15 30 30
Filling height mm   600   600
Filling height (with mixer) mm 1130   1130  
Mixer          
Power kW 0,75   0,75  
Capacity l 80   80  
Mortar hopper          
Capacity l 120 120 120 120
Weight Kg 430 305 440 328
Optional accessories          
Cement slurries injection kit   Yes Yes Yes Yes

* Depending on material, consistency and hose diameter. Both distances cannot be reached simultaneously.